How Much Does a Walk-In Tile Shower Cost?

National cost guides put a walk-in shower at about $4,000 to $20,000, with a typical project around $9,500 to $12,000. A midrange tiled walk-in usually lands at about $8,000 to $13,000, and high-end custom showers run $14,000 and up (This Old House, 2026). Prefab kits cost less, roughly $2,000 to $7,000 installed. Where a tiled shower lands depends on its size, the tile, the glass, and whether the drain or plumbing has to move.
What is included in the cost of a tiled walk-in shower?
A tiled walk-in shower is several jobs in one: removing the old shower or bathroom finishes, checking and repairing the wall and floor framing behind them, building the shower pan that slopes water to the drain, waterproofing the floor and walls, setting the tile, grouting, and installing the glass. Plumbing changes and any electrical work are part of the total too. Because the waterproofing behind the tile is what keeps the shower from leaking, it is worth paying for that part to be done properly even on a modest budget.
What makes a walk-in shower cost more?
Size is the first factor, since a larger shower needs more tile, more waterproofing, and more glass. Tile choice comes next: national guides put ceramic or porcelain at about $12 to $30 per square foot and natural stone at about $20 to $50 (This Old House, 2026). Glass adds a real amount, about $500 to $1,200 for a framed door and $1,000 to $3,000 or more for a frameless enclosure. Moving the drain or water lines, adding a built-in niche or bench, and a curbless entry, which needs the floor modified so the shower sits level with the bathroom, all push the price up. Water damage found behind an old shower also adds to the cost, which is why it should be checked before a firm price is given.
Is a tiled walk-in shower worth it over a prefab kit?
A prefab or acrylic kit costs less and goes in faster, with fewer joints to clean. A tiled shower costs more, but you choose its exact size, layout, entry, niches, and the look of the tile, and a properly waterproofed tile shower lasts for decades. Tile tends to make the most sense in a bathroom you plan to keep for many years. See is a tile shower better than an acrylic shower on our shower tile page for a fuller comparison.
How long does a walk-in tile shower take to build?
Most tiled showers take a week or more from demolition to first use. The schedule is driven by cure times rather than hours of labor: the pan, the waterproofing, the setting mortar, and the grout each need time before the next stage. Water damage found behind the old shower can extend it. Because the work is indoors, it can be scheduled through a Michigan winter.
How do you get an accurate price?
Compare written estimates that spell out the same things: the shower size, the pan and waterproofing method, the tile and its square footage, the glass, and any plumbing changes. Those items cause most of the difference between quotes. See the tile section of our cost guide for more ranges, or see shower tile installation and contact us for a free estimate.
Frequently Asked Questions
How much does a walk-in tile shower cost?
National cost guides put a midrange tiled walk-in shower at about $8,000 to $13,000, with high-end custom showers at $14,000 and up (This Old House, 2026). Size, tile, glass, and plumbing changes make most of the difference.
Is a prefab walk-in shower cheaper than tile?
Yes. National cost guides put a prefab shower kit at roughly $2,000 to $7,000 installed, against about $8,000 to $13,000 for a midrange tiled walk-in. Tile costs more because of the custom pan, waterproofing, tile work, and glass, and in return you choose the exact size, layout, and look.
How much does glass add to a walk-in shower?
National cost guides put a framed glass door at about $500 to $1,200 and a frameless glass enclosure at about $1,000 to $3,000 or more (This Old House, 2026).
Does a curbless walk-in shower cost more?
Yes. A curbless shower sits level with the bathroom floor, so the floor has to be modified to slope water to the drain, and it needs extra waterproofing. That puts it in a higher price range than a shower with a low curb.
Need Professional Help?
If you've identified masonry issues or need a professional inspection, Grand Rapids Masonry & Restoration is here to help. We serve the Grand Rapids metro area and surrounding communities.
Related Articles

Who Installs Shower Tile in Grand Rapids?
Shower tile installation is handled by tile contractors who build the waterproofing assembly behind the tile — not just set finish tile. Here is who to hire in Grand Rapids and what the scope includes.

How Much Does Tile Floor Installation Cost?
National cost guides put a complete tile floor at roughly $15 to $75 per square foot, and our own approximate range is $20 to $60 installed. Here is what goes into the price, what pushes it higher, and how to compare estimates.

Should You Regrout Shower Tile or Rebuild the Shower?
Regrouting shower tile is worth it when the tile is sound and the waterproofing is intact. When grout keeps reopening or there is a stain below the shower, the problem is usually behind the tile — not in the grout.
Tile Services in Greater Grand Rapids
Grand Rapids Masonry & Restoration handles indoor tile work year-round — showers, floors, backsplashes, repair, and replacement across the Grand Rapids metro.
View all tile contractor services →